Discover the beautiful side of lawn mowing with our Comfort range of solo by AL-KO lawn tractors. The T16-103.7 HD V2 Comfort lawn tractor is the ideal partner for large gardens.
High-quality components, developed in Germany and manufactured in Austria: This is how the lawn mower tractor T16-103.7 HD V2 Comfort presents itself. Large areas can be mowed efficiently and above all comfortably with this powerful lawn mower tractor. With a range of accessories available such as a tow bar, and roller, the T16-103.7HD is a versatile garden tractor
Being the largest lawn tractor from the Comfort line with a cutting width of 103 cm, it is perfect for efficiently and quickly mowing large gardens. Our T16-103.7 HD V2 Comfort workhorse is powered by a 9.1 kW strong 2-cylinder Briggs & Stratton engine and is fitted with a front bumper to provide protection as standard. The cutting height can be adjusted using a single lever from 30 mm to 80 mm in 6 stages. The durable mower deck is made of sheet steel and includes two blades for a clean cut and is designed to be easy to remove for cleaning and maintenance. The large 18 inch tyres ensure optimum traction whilst being gentle on the lawn. Whilst sat in the adjustable driver's seat, the large 300 litre collector can be emptied simply by telescopic lever. The audible fill level signal alerts the user that the collector is full and requires emptying before any blockages occur. Another comfort advantage is the soft touch anti-slip steering wheel, the headlights with bright LED lights and the clear controls.
The T16-103.7 HD V2 Comfort lawn tractor is the ideal partner for mowing large lawns. Comfortable, efficient and with top results: with it you discover the beautiful sides of the mowing. If you are looking for a lawn mower tractor with a smaller cutting width (93 cm), we recommend the T16-93.7 HD V2 Comfort lawn tractor.
AL-KO premium delivery service: Our solo by AL-KO products can be delivered by one our specialist lawn tractor retailers. Our premium delivery service includes delivery of the assembled product to your property as well as advice on how to use the ready-to-use machine. Read more.
The bright LED headlights improve visitbility when working in low light conditions.
|Product Range||solo by AL-KO|
|Country of Manufacture||Austria|
|Box Emptying||gas spring supported|
|Box Volume in Litres||300|
|Warranty||5 Year Domestic*|
|Drive Speed||0-9/0-4 km/h|
|Displacement in cc||656|
|Cutter Deck||Steel Plate|
|Product dimensions (LxWxH)||252 x 110 x 114cm|
|Number of blades||2|
|Motor||B&S Intek Series 7160|
|For Lawns (in m²)||7,000|
|Tyre Size (inches) Front / Rear||15x 6.0 - 6/18x 8.5 - 8|
|Cutting Width in cm||103|
|Cutting Height||20-80 mm|
|Cutting Height Adjustment||Central, 7-stage|
|Number of Cylinders||2|
|Safety Data Sheet||EU-Konf. (Download PDF, 136.6 KB)|
|User Manual||Manual (Download PDF, 23.7 MB)|
We strongly advise against the use of a starting pilot or similar. Chemicals can in the worst case lead to engine damage. We recommend acontacting an AL-KO service partner
An SAE 30 engine oil is recommended, or a 5W30 or 10W40 can be used.
Possible causes: grass too wet, grass is too long, driving speed is too fast, dirty mower deck. The clippings are transported by the air flow of the blade. The following components must be checked and corrected: Blade / blade wing, engine speed, ventilation of the Grassbox, mower deck. We recommend a service by your AL-KO service partner
Under the seat, on the brake pedal and on the rear of the tractor (under the collector box), safety switches are installed. One of these switches is not activated, may be defective or a cable may have come loose. Check switch operation, check cable or replace safety switch. Pulleys and / or ball bearings may be defective and must be replaced. We recommend a service by your AL-KO service partner .
Hydrostatic transmission tractors about 11 km / h (without mowing). Tractors with manual transmission approx. 10 km / h (without mowing).
The bearings of the pulleys could be defective. These must then be replaced. Please contact an AL-KO service partner
Tractors with a cutting width of 74-82 cm: 180 cm inside. Tractors with a cutting width of 92-102 cm: 190 cm inside.
Tractors can be used with a tilt angle of max. 10 degrees. After that, the engine is no longer lubricated properly.
102 cm Cutting width rear discharge = passage width 113 cm 92 cm cutting width rear discharge = passage width 102 cm 85 cm cutting width rear discharge = passage width 102 cm 74 cm cutting width rear discharge = passage width 95 cm 82 cm cutting width side ejection = passage width 107 cm.
Clean the unit, change the air filter, spark plug and oil. The blades shaprened and balanced. Store in a dry place.
Controls to the gearbox and the gearbox must be set. We recommend a review by your AL-KO service partner
solo by AL-KO T 16-103.7 HD V2 Comfort Lawn Tractor
Solo by AL-KO T 16-105.6 HD V2 Premium Lawn Tractor
Solo by AL-KO T 20-105.5 HDE V2 Premium Lawn Tractor
|Product Range||solo by AL-KO||solo by AL-KO||solo by AL-KO|
|Country of Manufacture||Austria||Austria||Austria|
|Box Emptying||gas spring supported||Telescopic lever||Electromagnetic|
|Box Volume in Litres||300||310||310|
|Function||Catching, Mowing||Catching, Mowing, Mulchmowing||Catching, Mowing, Mulchmowing|
|Warranty||5 Year Domestic*||5 Year Domestic*||5 Year Domestic*|
|Drive Speed||0-9/0-4 km/h||9.0km/h / 4.0km/h||11.0km/h / 5.0km/h|
|Transmission||Foot hydrostatic||Foot hydrostatic||Foot hydrostatic|
|Displacement in cc||656||656||656|
|Cutter Deck||Steel Plate||Steel Plate||Steel Plate|
|Product dimensions (LxWxH)||252 x 110 x 114cm||251 x 110 x 117cm||256 x 110 x 117cm|
|Number of blades||2||2||2|
|Motor||B&S Intek Series 7160||B&S Intek Series 7160 V-Twin||B&S Intek Series 7200 V-Twin|
|For Lawns (in m²)||7,000||8,000||8,000|
|Tyre Size (inches) Front / Rear||15x 6.0 - 6/18x 8.5 - 8||16x6.5 - 8/20x10.0-8||16x6.5 - 8/23x10.5 -12|
|Cutting Width in cm||103||105||105|
|Cutting Height||20-80 mm||30-90 mm||20-80 mm|
|Cutting Height Adjustment||Central, 7-stage||Central, 7-stage||Central, 7-stage|
|Number of Cylinders||2||2||2|