The premium German engineered solo by AL-KO T20-105.6 HD V2 has a front bumper and cruise control fitted as standard. The quality T20-105.6 garden tractor is powered by a 656cc Briggs & Stratton Intek 7200 Series 2 cylinder engine and has wide profile tyres for enhanced grip yet do not damage the lawn.The large 310 litre collector minimises the number times you need to stop to empty the grass. An optional electric emptying feature is also available which makes this process even more simple and effortless.
With other convenient features such as the external fuel tank cap meaning you do not need to lift the bonnet to add fuel, fully adjustable seat and sports steering-wheel, the solo by AL-KO T20-105.6 lawn tractor makes cutting the grass a pleasure.
NOTE: For the 3INONE function, the optional deflector is required.
|Product Range||solo by AL-KO|
|Country of Manufacture||Austria|
|Box Emptying||Telescopic lever|
|Box Volume in Litres||310|
|Function||Catching, Mowing, Mulchmowing|
|Warranty||5 Year Domestic*|
|Drive Speed||11.0km/h / 5.0km/h|
|Displacement in cc||656|
|Cutter Deck||Steel Plate|
|Product dimensions (LxWxH)||256 / 110 / 120 cm|
|Number of blades||2|
|Motor||B&S Intek Series 7200 V-Twin|
|For Lawns (in m²)||10,000|
|Tyre Size (inches) Front / Rear||16x6.5 - 8/23x10.5 -12|
|Cutting Width in cm||105|
|Cutting Height||30-90 mm|
|Cutting Height Adjustment||Central, 7-stage|
|Number of Cylinders||2|
|User Manual||User manual (Download PDF, 7 MB)|
|Assembly Manual||Assembly manual (Download PDF, 5.7 MB)|
We strongly advise against the use of a starting pilot or similar. Chemicals can in the worst case lead to engine damage. We recommend acontacting an AL-KO service partner
An SAE 30 engine oil is recommended, or a 5W30 or 10W40 can be used.
Possible causes: grass too wet, grass is too long, driving speed is too fast, dirty mower deck. The clippings are transported by the air flow of the blade. The following components must be checked and corrected: Blade / blade wing, engine speed, ventilation of the Grassbox, mower deck. We recommend a service by your AL-KO service partner
Under the seat, on the brake pedal and on the rear of the tractor (under the collector box), safety switches are installed. One of these switches is not activated, may be defective or a cable may have come loose. Check switch operation, check cable or replace safety switch. Pulleys and / or ball bearings may be defective and must be replaced. We recommend a service by your AL-KO service partner .
Hydrostatic transmission tractors about 11 km / h (without mowing). Tractors with manual transmission approx. 10 km / h (without mowing).
The bearings of the pulleys could be defective. These must then be replaced. Please contact an AL-KO service partner
Tractors with a cutting width of 74-82 cm: 180 cm inside. Tractors with a cutting width of 92-102 cm: 190 cm inside.
Tractors can be used with a tilt angle of max. 10 degrees. After that, the engine is no longer lubricated properly.
102 cm Cutting width rear discharge = passage width 113 cm 92 cm cutting width rear discharge = passage width 102 cm 85 cm cutting width rear discharge = passage width 102 cm 74 cm cutting width rear discharge = passage width 95 cm 82 cm cutting width side ejection = passage width 107 cm.
Clean the unit, change the air filter, spark plug and oil. The blades shaprened and balanced. Store in a dry place.
Controls to the gearbox and the gearbox must be set. We recommend a review by your AL-KO service partner
solo by AL-KO T 20-105.6 HD V2 Premium Lawn Tractor
solo by AL-KO T 23-125.6 Premium Lawn Tractor HD V2
Solo by AL-KO T 16-105.6 HD V2 Premium Lawn Tractor
|Product Range||solo by AL-KO||solo by AL-KO||solo by AL-KO|
|Country of Manufacture||Austria||Austria||Austria|
|Box Emptying||Telescopic lever||Telescopic lever||Telescopic lever|
|Box Volume in Litres||310||310||310|
|Function||Catching, Mowing, Mulchmowing||Catching, Mowing, Mulchmowing||Catching, Mowing, Mulchmowing|
|Warranty||5 Year Domestic*||5 Year Domestic*||5 Year Domestic*|
|Drive Speed||11.0km/h / 5.0km/h||11.0km/h / 5.0km/h||9.0km/h / 4.0km/h|
|Transmission||Foot hydrostatic||Foot hydrostatic||Foot hydrostatic|
|Displacement in cc||656||724||656|
|Cutter Deck||Steel Plate||Steel Plate||Steel Plate|
|Product dimensions (LxWxH)||256 / 110 / 120 cm||256 x 130 x 120cm||251 x 110 x 117cm|
|Number of blades||2||2||2|
|Motor||B&S Intek Series 7200 V-Twin||B&S Intek Series 8230||B&S Intek Series 7160 V-Twin|
|For Lawns (in m²)||10,000||10,000||8,000|
|Tyre Size (inches) Front / Rear||16x6.5 - 8/23x10.5 -12||16x6.5 - 8/23x10.5 -12||16x6.5 - 8/20x10.0-8|
|Cutting Width in cm||105||125||105|
|Cutting Height||30-90 mm||30-90 mm||30-90 mm|
|Cutting Height Adjustment||Central, 7-stage||Central, 7-stage||Central, 7-stage|
|Number of Cylinders||2||2||2|