You are here: Home > AL-KO POWER UNIT® 250 and 300

AL-KO POWER UNIT® 250 and 300

  • Compact design
  • Highest reliability
  • High extraction performance
  • Integrated pre-separator
  • 100% air recirculation residual dust content < 0.1 mg/m³
  • Low noise emissions
  • Longer filter service life
  • Easy to empty
  • Supplied ready to plug in
  • All models are also available with rotary lock valve...

Are you interested in the AL-KO POWER UNIT® 250 / 300?

Find your contact partner in your region now

Your advantages

 

 

Investment security

AL-KO POWER UNIT 250 P and 300 P can be retrofitted with a briquette press or rotary lock valve if desired.

+ More...

 

 

 

Superior technology - AL-KO POWER UNIT®

The large-volume air surge tank with fast diaphragm valves ensures optimum JET filter cleaning and the lowest use of compressed air. The filter bags ensure easy handling with their standard snap ring lock. They are made from an antistatic polyester needle felt material and BGIA-tested for dust class M.

+ More...

 

 

 

Easy discharging

You can easily remove and empty swarf collecting containers for the AL-KO POWER UNIT 250 P and 300 P without requiring any tools. An ergonomic clamping lever ensures easy and clean locking.

+ More...

 

 

 

Good for people and equipment

Thanks to AL-KO OPTI JET® filter technology and its outstanding dedusting performance, residual dust content is only 0.1 mg/m³. 100% of this pure air is then redirected back into the workplace.

+ More...

 

 

 

Of course, there's safety

For the event that hopefully never occurs, your AL-KO POWER UNIT ® 250 / 300 dust extractor is protected against fire via an integrated automatic fire extinguisher that is fully self-sufficient. It functions without a connection to the water supply system and it incurs no additional maintenance costs. In addition, all models are also pressure shock tested up to 200 mbar.

+ More...

 

Description

  • Compact design
  • Highest reliability
  • High extraction performance
  • Integrated pre-separator
  • 100% air recirculation residual dust content < 0.1 mg/m³
  • Low noise emissions
  • Longer filter service life
  • Easy to empty
  • Supplied ready to plug in
  • All models are also available with rotary lock valve or briquette press

The large AL-KO POWER UNIT® models for use in the workshop impress with very long maintenance intervals, long filter service life and excellent running smoothness even under full load. AL-KO POWER UNIT® 200 / 250 / 300 are available with mobile dust and swarf containers as well as with rotary lock valve or integrated briquette press.

Technical data

Models with containers for collecting dust and swarfAL-KO POWER UNIT® 250PAL-KO POWER UNIT® 300P
Extraction nozzles250 mm300 mm
Nominal motor rating6.5 kW / 3 Ph7.5 kW / 3 Ph
Voltage400 V / 50 Hz400 V / 50 Hz
Maximum flow rate4,900 m³/h6,000 m³/h
Nominal flow rate*3,534 m³/h5,089 m³/h
Vacuum2,451 Pa2,280 Pa
Filter area22.4 m²30 m²
Filter dedustingPressurised airPressurised air
Swarf collection capacity2 x 250 litre3 x 165 litre
Dimensions (L x W x H) in mm2,305 x 994 x 2,3512,950 x 994 x 2,351
Models with integrated briquette pressAL-KO POWER UNIT® 250 P-BPAL-KO POWER UNIT® 300 P-BP
Extraction nozzles250 mm300 mm
Nominal motor rating6.5 kW / 3 Ph7.5 kW / 3 Ph
Voltage400 V / 50 Hz400 V / 50 Hz
Maximum flow rate4,900 m³/h6,000 m³/h
Nominal flow rate*3,534 m³/h5,089 m³/h
Vacuum2,451 Pa2,280 Pa
Filter area22.4 m²30 m²
Dimensions (L x W x H) in mm2,305 x 1,333 x 2,6092,950 x 1,333 x 2,807
Briquetting rate30 - 50 kg/h50 - 70 kg/h
Briquette diameter50 mm70 mm
Models with rotary lock valveAL-KO POWER UNIT® 250 ZRSAL-KO POWER UNIT® 300 ZRS
Extraction nozzles250 mm300 mm
Nominal motor rating6.5 kW / 3 Ph7.5 kW / 3 Ph
Voltage400 V / 50 Hz400 V / 50 Hz
Maximum flow rate4,900 m³/h6,000 m³/h
Nominal flow rate*3,534 m³/h5,089 m³/h
Vacuum2,451 Pa2,280 Pa
Filter area22.4 m²30 m²
Dimensions (L x W x H) in mm2,305 x 998 x 2,7972,950 x 994 x 3,013
Star feeder performance15,816 L / h15,816 L / h
Weight728 kg920 kg

Get a quote

AL-KO POWER UNIT 200 / 250 / 300

AL-KO POWER UNIT 250 / 300 are high-performance compact units that are used as mobile extraction systems in carpenters' workshops, in plastics processing and in other industries. AL-KO POWER UNIT 250 / 300 extraction systems are pure air dust extractors from AL-KO. AL-KO POWER UNIT 250 and AL-KO POWER UNIT 300 are certified by the BG to BG H3. Both models are available both as an extraction system with swarf collecting tanks and as an extraction system with integrated briquette press or rotary lock valve.

 

AL-KO POWER UNIT 250 and AL-KO POWER UNIT 300 are therefore approved for use for extraction in the workroom. They comply with legislation on occupational health and industrial safety. AL-KO POWER UNIT 250 and AL-KO POWER UNIT 300 extraction systems are ideal for timber, dust and swarf, and therefore ideal for carpenters, joiners, plastics and for bottling plants.